Water Heater Replacement in Edina
Get fast, fair pricing from licensed local pros. Typical Edina cost: $1.3k – $3.1k installed.
- Tank, gas
- $1.3k – $3.1k
- Tank, electric
- $1.1k – $2.8k
- Tankless, gas
- $3.3k – $6.6k+
- Heat pump hybrid
- $2.8k – $6.1k
What's going on with your water heater?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Water heater replacement cost by type.
Installed prices for Edina, adjusted for local labor. Larger tanks and code upgrades move the number up.
Water heater replacement in Edina typically costs between $900 and $4,400, depending on the type and complexity. With many homes built around 1970, aging tanks are common, and the cold Minnesota winter inlet water increases demand on heaters. Most homes use natural gas, making gas tank or tankless units a strong fit. Permits are required, and homeowners can pull their own permit only if they live in the home; otherwise, a licensed contractor must do the work. Local plumbing code follows the 2020 Minnesota Plumbing Code (based on 2018 UPC), which requires expansion tanks on closed systems.
- Tank, 40–50 gal gasThe default for most US homes$1,300 – $3,100
- Tank, 40–50 gal electricNo venting required$1,100 – $2,800
- Tankless, gasEndless hot water, higher BTU gas line often needed$3,300 – $6,600+
- Hybrid heat pumpMost efficient, qualifies for federal credits$2,800 – $6,100
- Permit & disposalMost jurisdictions require it$55 – $375
* Cold-region homes may need extra insulation or larger tanks.
Water heaters in Edina
U.S. Census ACS- Households
- 21,215
- Homeowners
- 16,034
- 67% own
- Median home value
- $601,700
- Median income
- $125,506
- Median home built
- 1970
- Housing units
- 23,998
With a median home built in 1970, many Edina water heaters are at or past their 8–12 year lifespan — a common reason replacements spike here.
What’s different about Edina.
Generic cost pages skip the things that actually decide your price and your unit’s lifespan here — local code, water, and the money you can claim back.
Recommended unit for Edina
Given Minnesota’s cold northern climate and gas water heating, high-efficiency gas is the sensible default for most Edina homes. Winter inlet water runs cold here, so recovery rate matters — size up a tankless or favor a high-recovery tank. A pro can confirm the right size and fuel for your home.
Sources: MN DLI - 2020 Minnesota Plumbing Code (based on 2018 UPC) · MN Dept. of Commerce - Home Electrification and Appliance Rebate (HEAR) · EIA - Minnesota State Energy Profile
What Edina code requires
Replacing a water heater in Edina follows Minnesota rules under the Uniform Plumbing Code (UPC) - 2020 Minnesota Plumbing Code based on 2018 UPC. Here’s what applies statewide:
- PermitRequired
Pulled by your licensed plumber; covers gas/venting and the expansion tank.
- Seismic strappingNot required
No state strapping mandate — one less line on the bill.
- Expansion tankRequired on closed systems
Required where a pressure regulator or backflow preventer is present.
- Plumbing codeUniform Plumbing Code (UPC) - 2020 Minnesota Plumbing Code based on 2018 UPC
- Good to know—
Homeowners may pull their own water-heater plumbing permit only for a home they homestead (live in); otherwise a state-licensed plumbing contractor is required.
Sources: MN DLI - 2020 Minnesota Plumbing Code (based on 2018 UPC) · MN Dept. of Commerce - Home Electrification and Appliance Rebate (HEAR) · EIA - Minnesota State Energy Profile
Not sure which rules and rebates apply to your home?
A licensed Edina pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Edina
Minnesota water heating is mostly gas, which shapes the money back:
- StateRebate amount not verified (program tied to HEAR; not yet fully launched)Minnesota Residential Heat Pump Rebate Program (Dept. of Commerce) →
State-level program — verify eligibility before you buy.
- StateUp to $14,000 per household (income-qualified); not yet launched pending DOE approvalHome Electrification and Appliance Rebate program (HEAR) - covers heat pump water heaters →
State-level program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit →
For a qualifying ENERGY STAR heat pump water heater. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a heat pump water heater) applies in every state.
Ready to get your water heater fixed in Edina?
Speak with a licensed, insured water heater pro near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
Hot water back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No hot water, a leak, or time for a new unit.
- 2
Get matched with a local pro
We connect you with a licensed, insured water heater specialist near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your hot water back. Most jobs done in a few hours.
Water Heater Replacement in Edina, explained.
What influences water heater replacement cost in Edina?
Prices vary by unit type: gas tank ($900–$2,200), electric tank ($1,000–$2,400), tankless ($1,650–$3,900+), and heat pump ($2,000–$4,400). Labor includes permit fees and code compliance, such as installing an expansion tank if needed. Older homes may require additional venting or gas line upgrades. The federal 25C tax credit offers 30% up to $2,000 for heat pump units, but gas remains the more affordable option for most Edina homes.
Common water heater problems in Edina
Sediment buildup
Hard water and cold inlet temperatures cause sediment accumulation, reducing efficiency and lifespan.
Rust and corrosion
Older tanks (often from the 1970s) are prone to rust, leading to leaks and failure.
Inadequate capacity
Larger households may outgrow a standard 40-gallon tank, especially during winter when incoming water is colder.
What to expect during water heater replacement in Edina
A licensed contractor will disconnect the old unit, install the new one per Minnesota code, and ensure proper venting and gas connections. Permits are pulled by the contractor (or homeowner if eligible). The job typically takes 4–6 hours. For gas units, an expansion tank may be required on closed systems. After installation, the system is tested for leaks and proper temperature.
Water Heater Replacement FAQs — Edina
Yes, a permit is required. Homeowners can pull their own permit only if they live in the home; otherwise, a state-licensed plumbing contractor must do it.
Water Heater Replacement near Edina
Get a water heater quote.
Tank or tankless — compare quotes from licensed local pros.