Water Heater Replacement in Herriman
Get fast, fair pricing from licensed local pros. Typical Herriman cost: $1.3k – $3.1k installed.
- Tank, gas
- $1.3k – $3.1k
- Tank, electric
- $1.1k – $2.8k
- Tankless, gas
- $3.3k – $6.6k+
- Heat pump hybrid
- $2.8k – $6.1k
What's going on with your water heater?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Water heater replacement cost by type.
Installed prices for Herriman, adjusted for local labor. Larger tanks and code upgrades move the number up.
In Herriman, Utah, most homes were built around 2011, meaning many water heaters are now 10–15 years old and approaching the end of their lifespan. With a median household income of $115,198, homeowners typically invest in a replacement that suits their needs and budget. Local installed pricing for a tank gas water heater ranges from $900 to $2,200, while tankless models run $1,650 to $3,900+. Because Herriman sits in a seismic zone, state code requires seismic strapping at the upper and lower one-third of the tank. A permit is also required under the Utah State Construction Code (Title 15A). Given the cold semi-arid climate and cold winter inlet water, gas water heaters are a strong fit for most homes, offering efficient recovery and lower operating costs.
- Tank, 40–50 gal gasThe default for most US homes$1,300 – $3,100
- Tank, 40–50 gal electricNo venting required$1,100 – $2,800
- Tankless, gasEndless hot water, higher BTU gas line often needed$3,300 – $6,600+
- Hybrid heat pumpMost efficient, qualifies for federal credits$2,800 – $6,100
- Permit & disposalMost jurisdictions require it$55 – $375
* Cold-region homes may need extra insulation or larger tanks.
Water heaters in Herriman
U.S. Census ACS- Households
- 22,120
- Homeowners
- 13,080
- 80% own
- Median home value
- $486,200
- Median income
- $115,198
- Median home built
- 2011
- Housing units
- 16,361
With a median home built in 2011, many Herriman water heaters are at or past their 8–12 year lifespan — a common reason replacements spike here.
What’s different about Herriman.
Generic cost pages skip the things that actually decide your price and your unit’s lifespan here — local code, water, and the money you can claim back.
Recommended unit for Herriman
Given Utah’s cold semi-arid / high desert climate and gas water heating, high-efficiency gas is the sensible default for most Herriman homes. Winter inlet water runs cold here, so recovery rate matters — size up a tankless or favor a high-recovery tank. A pro can confirm the right size and fuel for your home.
Sources: Utah Plumbing Code Ch. 5 Water Heaters (UpCodes, IPC 2021) · P2801.8 Water heater seismic bracing - Utah Residential Code 2021 (ICC) · EIA Utah State Energy Data
What Herriman code requires
Replacing a water heater in Herriman follows Utah rules under the International Plumbing Code (IPC) / International Residential Code (IRC) under Utah State Construction Code (Title 15A). Here’s what applies statewide:
- PermitRequired
Pulled by your licensed plumber; covers gas/venting and the expansion tank.
- Seismic strappingRequired
State code requires seismic strapping on water heater replacements — budget for it on every quote.
- Expansion tankRequired on closed plumbing systems
Required where a pressure regulator or backflow preventer is present.
- Plumbing codeInternational Plumbing Code (IPC) / International Residential Code (IRC) under Utah State Construction Code (Title 15A)
- Good to know—
Utah is in a seismic zone, so water heaters must be anchored/strapped at the upper and lower one-third; a pan drain is not required on a replacement if one was not previously installed.
Sources: Utah Plumbing Code Ch. 5 Water Heaters (UpCodes, IPC 2021) · P2801.8 Water heater seismic bracing - Utah Residential Code 2021 (ICC) · EIA Utah State Energy Data
Not sure which rules and rebates apply to your home?
A licensed Herriman pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Herriman
Utah water heating is mostly gas, which shapes the money back:
- Federal30% of cost, up to $2,000Federal 25C tax credit →
For a qualifying ENERGY STAR heat pump water heater. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump water heater) applies in every state, including Utah.
Ready to get your water heater fixed in Herriman?
Speak with a licensed, insured water heater pro near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
Hot water back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No hot water, a leak, or time for a new unit.
- 2
Get matched with a local pro
We connect you with a licensed, insured water heater specialist near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your hot water back. Most jobs done in a few hours.
Water Heater Replacement in Herriman, explained.
What drives water heater replacement costs in Herriman?
The final price depends on the unit type and capacity, labor for installation, and any code-required upgrades. Gas tank models are generally more affordable than tankless or heat pump units. Seismic strapping is mandatory and may add $50–$150. If your home has a closed plumbing system, an expansion tank is required, adding $100–$200. Permit fees are typically $50–$150. Older homes may need minor vent or gas line modifications, increasing labor time.
Common water heater issues in Herriman
Sediment buildup
Hard water from the municipal supply can cause sediment accumulation, reducing efficiency and leading to rumbling noises or premature failure.
Seismic damage risk
Herriman is in a seismic zone; unstrapped water heaters can tip during an earthquake, causing gas leaks or flooding.
Cold inlet water
Winter inlet water temperatures can drop significantly, requiring a higher BTU input to maintain hot water output, especially for tankless units.
What to expect during a water heater replacement
A licensed plumber will first disconnect and remove the old unit, then install the new water heater according to local code. This includes seismic strapping, an expansion tank if needed, and proper venting for gas models. The job typically takes 3–6 hours. After installation, the plumber will test for leaks and ensure the unit is operating correctly. You will need to pull a permit from the city, which the contractor can handle.
Water Heater Replacement FAQs — Herriman
Yes, a permit is required under the Utah State Construction Code (Title 15A). Your contractor typically obtains it, and the cost is usually $50–$150.
Water Heater Replacement near Herriman
Get a water heater quote.
Tank or tankless — compare quotes from licensed local pros.