Water Heater Replacement in Murray
Get fast, fair pricing from licensed local pros. Typical Murray cost: $1.3k – $2.9k installed.
- Tank, gas
- $1.3k – $2.9k
- Tank, electric
- $1.1k – $2.6k
- Tankless, gas
- $3.2k – $6.3k+
- Heat pump hybrid
- $2.6k – $5.8k
What's going on with your water heater?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Water heater replacement cost by type.
Installed prices for Murray, adjusted for local labor. Larger tanks and code upgrades move the number up.
In Murray, Utah, replacing a water heater typically costs between $850 and $4,200 depending on the type and installation complexity. With a median home age of 48 years and cold winter inlet water, many homes benefit from upgrading to a gas tank or tankless model. Local permits are required under the Utah State Construction Code, and seismic strapping is mandatory due to the area's earthquake risk. Labor rates reflect Murray's moderate cost of living, and the federal 25C tax credit (30%, up to $2,000) can offset the cost of a qualifying heat pump water heater. Homeowners should factor in potential expansion tank installation on closed systems and disposal fees for the old unit.
- Tank, 40–50 gal gasThe default for most US homes$1,250 – $2,900
- Tank, 40–50 gal electricNo venting required$1,050 – $2,600
- Tankless, gasEndless hot water, higher BTU gas line often needed$3,200 – $6,300+
- Hybrid heat pumpMost efficient, qualifies for federal credits$2,600 – $5,800
- Permit & disposalMost jurisdictions require it$55 – $375
* Cold-region homes may need extra insulation or larger tanks.
Water heaters in Murray
U.S. Census ACS- Households
- 20,016
- Homeowners
- 13,094
- 62% own
- Median home value
- $415,700
- Median income
- $81,693
- Median home built
- 1978
- Housing units
- 21,301
With a median home built in 1978, many Murray water heaters are at or past their 8–12 year lifespan — a common reason replacements spike here.
What’s different about Murray.
Generic cost pages skip the things that actually decide your price and your unit’s lifespan here — local code, water, and the money you can claim back.
Recommended unit for Murray
Given Utah’s cold semi-arid / high desert climate and gas water heating, high-efficiency gas is the sensible default for most Murray homes. Winter inlet water runs cold here, so recovery rate matters — size up a tankless or favor a high-recovery tank. A pro can confirm the right size and fuel for your home.
Sources: Utah Plumbing Code Ch. 5 Water Heaters (UpCodes, IPC 2021) · P2801.8 Water heater seismic bracing - Utah Residential Code 2021 (ICC) · EIA Utah State Energy Data
What Murray code requires
Replacing a water heater in Murray follows Utah rules under the International Plumbing Code (IPC) / International Residential Code (IRC) under Utah State Construction Code (Title 15A). Here’s what applies statewide:
- PermitRequired
Pulled by your licensed plumber; covers gas/venting and the expansion tank.
- Seismic strappingRequired
State code requires seismic strapping on water heater replacements — budget for it on every quote.
- Expansion tankRequired on closed plumbing systems
Required where a pressure regulator or backflow preventer is present.
- Plumbing codeInternational Plumbing Code (IPC) / International Residential Code (IRC) under Utah State Construction Code (Title 15A)
- Good to know—
Utah is in a seismic zone, so water heaters must be anchored/strapped at the upper and lower one-third; a pan drain is not required on a replacement if one was not previously installed.
Sources: Utah Plumbing Code Ch. 5 Water Heaters (UpCodes, IPC 2021) · P2801.8 Water heater seismic bracing - Utah Residential Code 2021 (ICC) · EIA Utah State Energy Data
Not sure which rules and rebates apply to your home?
A licensed Murray pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Murray
Utah water heating is mostly gas, which shapes the money back:
- Federal30% of cost, up to $2,000Federal 25C tax credit →
For a qualifying ENERGY STAR heat pump water heater. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump water heater) applies in every state, including Utah.
Ready to get your water heater fixed in Murray?
Speak with a licensed, insured water heater pro near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
Hot water back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No hot water, a leak, or time for a new unit.
- 2
Get matched with a local pro
We connect you with a licensed, insured water heater specialist near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your hot water back. Most jobs done in a few hours.
Water Heater Replacement in Murray, explained.
What influences water heater replacement costs in Murray?
Prices vary by unit type: gas tank ($850–$2,100), electric tank ($950–$2,300), tankless ($1,600–$3,700+), and heat pump ($1,900–$4,200). Older homes may need plumbing or venting upgrades, especially when switching from a tank to a tankless system. Seismic strapping is required and adds minimal cost, while permit fees (typically $50–$150) are included in most quotes. Cold groundwater in winter can reduce tankless efficiency, so gas tank models are often recommended for their reliable recovery rate.
Common water heater issues in Murray homes
Sediment buildup
Hard water minerals accumulate in the tank, reducing efficiency and causing rumbling noises. Flushing annually helps extend the unit's life.
Seismic strapping failure
Older installations may lack proper upper and lower strapping, risking gas line damage during an earthquake. Code requires secure anchoring.
Expansion tank needed
Closed plumbing systems (common in newer homes) require an expansion tank to prevent pressure damage. This is often overlooked in replacements.
What to expect during a water heater replacement
A licensed plumber will disconnect the old unit, drain it, and remove it. They'll install seismic straps, connect gas or electric lines, and install an expansion tank if needed. A permit is pulled with Salt Lake County, and the job is typically completed in 2–4 hours. After installation, the plumber will test for leaks and ensure proper venting.
Water Heater Replacement FAQs — Murray
Yes, a permit is required under the Utah State Construction Code. Your plumber usually handles the permit application, which costs $50–$150.
Water Heater Replacement near Murray
Get a water heater quote.
Tank or tankless — compare quotes from licensed local pros.