Water Heater Replacement in Beaver Dam
Get fast, fair pricing from licensed local pros. Typical Beaver Dam cost: $1k – $2.3k installed.
- Tank, gas
- $1k – $2.3k
- Tank, electric
- $850 – $2.1k
- Tankless, gas
- $2.5k – $5k+
- Heat pump hybrid
- $2.1k – $4.6k
What's going on with your water heater?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Water heater replacement cost by type.
Installed prices for Beaver Dam, adjusted for local labor. Larger tanks and code upgrades move the number up.
In Beaver Dam, where the median home was built in 1964, many water heaters are past their expected lifespan. Replacing a water heater typically costs between $650 and $1,650 for a gas tank model, which is the recommended choice given the area's cold winters and mostly gas heating infrastructure. Electric tank units run $750–$1,850, tankless $1,250–$2,900+, and heat pump models $1,500–$3,300. Wisconsin requires permits for water heater replacement, and only licensed plumbers or owner-occupants can perform the work. The state plumbing code (SPS 382-387) applies, and an expansion tank is required if your system is closed. For most homes, a gas tank water heater offers a strong fit due to lower operating costs and reliable performance in cold inlet water conditions.
- Tank, 40–50 gal gasThe default for most US homes$1,000 – $2,300
- Tank, 40–50 gal electricNo venting required$850 – $2,100
- Tankless, gasEndless hot water, higher BTU gas line often needed$2,500 – $5,000+
- Hybrid heat pumpMost efficient, qualifies for federal credits$2,100 – $4,600
- Permit & disposalMost jurisdictions require it$40 – $300
* Cold-region homes may need extra insulation or larger tanks.
Water heaters in Beaver Dam
U.S. Census ACS- Households
- 6,661
- Homeowners
- 4,178
- 52% own
- Median home value
- $167,800
- Median income
- $65,802
- Median home built
- 1964
- Housing units
- 8,074
With a median home built in 1964, many Beaver Dam water heaters are at or past their 8–12 year lifespan — a common reason replacements spike here.
What’s different about Beaver Dam.
Generic cost pages skip the things that actually decide your price and your unit’s lifespan here — local code, water, and the money you can claim back.
Recommended unit for Beaver Dam
Given Wisconsin’s cold northern climate and gas water heating, high-efficiency gas is the sensible default for most Beaver Dam homes. Winter inlet water runs cold here, so recovery rate matters — size up a tankless or favor a high-recovery tank. A pro can confirm the right size and fuel for your home.
Sources: DSPS Plumbing License Laws in Wisconsin · Focus on Energy residential heating and cooling rebates · EIA Wisconsin State Energy Profile
What Beaver Dam code requires
Replacing a water heater in Beaver Dam follows Wisconsin rules under the Wisconsin state plumbing code (SPS 382-387), referencing IPC for water heater installation. Here’s what applies statewide:
- PermitRequired
Pulled by your licensed plumber; covers gas/venting and the expansion tank.
- Seismic strappingNot required
No state strapping mandate — one less line on the bill.
- Expansion tankRequired on closed systems
Required where a pressure regulator or backflow preventer is present.
- Plumbing codeWisconsin state plumbing code (SPS 382-387), referencing IPC for water heater installation
- Good to know—
Wisconsin has its own state plumbing code administered by DSPS; only owner-occupants or licensed plumbers may do the work, and local permits are generally required.
Sources: DSPS Plumbing License Laws in Wisconsin · Focus on Energy residential heating and cooling rebates · EIA Wisconsin State Energy Profile
Not sure which rules and rebates apply to your home?
A licensed Beaver Dam pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Beaver Dam
Wisconsin water heating is mostly gas, which shapes the money back:
- State$300 minimum instant rebate (UEF >= 3.3, under 120 gallons)Focus on Energy - Heat Pump Water Heater instant rebate →
State-level program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit →
For a qualifying ENERGY STAR heat pump water heater. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a heat pump water heater) applies in every state.
Ready to get your water heater fixed in Beaver Dam?
Speak with a licensed, insured water heater pro near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
Hot water back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No hot water, a leak, or time for a new unit.
- 2
Get matched with a local pro
We connect you with a licensed, insured water heater specialist near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your hot water back. Most jobs done in a few hours.
Water Heater Replacement in Beaver Dam, explained.
What affects your water heater replacement cost in Beaver Dam
The price you pay depends on the unit type and size, with gas tank models being more affordable than tankless or heat pump units. Labor costs reflect local rates and the complexity of removing an old unit, especially in tight spaces. Permit fees add a small amount. If your system is closed, an expansion tank is required, adding $50–$100. Upgrading from an electric to a gas unit may require gas line work, increasing the total. The federal 25C tax credit offers 30% (up to $2,000) for heat pump water heaters, which can offset the higher upfront cost.
Common water heater issues in Beaver Dam
Sediment buildup
Hard water and aging pipes can cause sediment to accumulate, reducing efficiency and leading to early failure.
Cold inlet water
Wisconsin's cold winter temperatures mean incoming water is very cold, forcing the heater to work harder and potentially reducing hot water output.
Permit and code compliance
Local permits are required, and the Wisconsin state plumbing code must be followed, including expansion tank requirements for closed systems.
Water Heater Replacement FAQs — Beaver Dam
Yes, a permit is generally required. Only a licensed plumber or the homeowner (if owner-occupant) can pull the permit and perform the work.
Water Heater Replacement near Beaver Dam
Get a water heater quote.
Tank or tankless — compare quotes from licensed local pros.